Stainless Steel Rebar Cap 1 1/2" Top

our patented locking tabs will either lock onto the rebar or be very difficult to remove depending on the rebar.

unlike aluminum or plastic stainless will not give easily when being placed onto the rebar. consider using a rebar driver or cut the rebar off after pounding into the ground, so the rebar is not mushroomed allowing the cap to be easily installed. 

1 1/2" disc is welded to the top of the cap. Currently our weld  is not strong enough for hammering, we encourage the use of a rubber hammer to install them. 

*in the next month or so we should be receiving a new machine to make the weld 10x stronger. so please check back often or subscribe to our facebook page.